前言：cacti监控mysql服务器的大概50张graphs都弄出来了，也出图了，当中遇到一些问题，印象比較深刻的记录例如以下：

（一）：加入io监控

 

点击Create Graphs for this Host 进去创建IO的图，结果报错

This data query returned 0 rows, perhaps there was a problem executing this data query. You can run this data query in debug mode  to get more information.

进入*Turn On Graph Debug Mode模式。报错例如以下：

RRDTool Command:

/usr/bin/rrdtool graph - \

--imgformat=PNG \

--start=-86400 \

--end=-300 \

--title='db-m2-slave-1 - Traffic' \

--rigid \

--base=1000 \

--height=120 \

--width=500 \

--alt-autoscale-max \

--lower-limit='0' \

--vertical-label='bits per second' \

--slope-mode \

--font TITLE:10: \

--font AXIS:7: \

--font LEGEND:8: \

--font UNIT:7: \

CDEF:cdefa='a,8,*' \

AREA:cdefa#00CF00FF:'Inbound'  \

GPRINT:cdefa:LAST:' Current\:%8.2lf %s'  \

GPRINT:cdefa:AVERAGE:'Average\:%8.2lf %s'  \

GPRINT:cdefa:MAX:'Maximum\:%8.2lf %s\n'  \

LINE1:cdefa#002A97FF:'Outbound'  \

GPRINT:cdefa:LAST:'Current\:%8.2lf %s'  \

GPRINT:cdefa:AVERAGE:'Average\:%8.2lf %s'  \

GPRINT:cdefa:MAX:'Maximum\:%8.2lf %s\n'

RRDTool Says:

ERROR: invalid rpn expression in: a,8,*，例如以下图所看到的

 

 

编辑linux主机下的/etc/snmp/snmpd.conf文件

找到：com2sec notConfigUser  default       public 

改动成：com2sec notConfigUser  all       public

找到：access  notConfigGroup ""      any       noauth    exact  systemview none none

改动成：access  notConfigGroup ""      any       noauth    exact  all none none

找到：#view all    included  .1     80把该行的#去掉,

找到：#view mib2   included  .iso.org.dod.internet.mgmt.mib-2 fc 把改行的#去掉,

重起snmpd：/etc/init.d/snmpd restart

（二）：MySQL加入主机出不来图

[root@squid-2 test]# service httpd restart

停止 httpd：                                               [确定]

正在启动 httpd：httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName

                                                           [确定]

1）  进入配置文件文件夹

cd  /etc/httpd/conf/

2）编辑httpd.conf文件。搜索"#ServerName"，加入ServerName localhost:80

[root@server conf]# ls

extra  httpd.conf  magic  mime.types  original

[root@server conf]# vi httpd.conf

#ServerName www.example.com:80

ServerName localhost:80

3）再又一次启动apache 就可以。

 

（三）：启动报错

[root@squid-2 error]# tail -f /var/log/httpd/error_log

[Sat May 31 22:49:02 2014] [notice] caught SIGTERM, shutting down

[Sat May 31 22:49:02 2014] [notice] SELinux policy enabled; httpd running as context unconfined_u:system_r:httpd_t:s0

[Sat May 31 22:49:02 2014] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)

[Sat May 31 22:49:02 2014] [notice] Digest: generating secret for digest authentication ...

[Sat May 31 22:49:02 2014] [notice] Digest: done

[Sat May 31 22:49:02 2014] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 configured -- resuming normal operations

解决方法：直接关闭SELinux以及防火墙 

（四）：MySQL监控项出图报错

[Sat May 31 23:20:10 2014] [error] [client 192.168.171.71] PHP Fatal error:  Allowed memory size of 134217728 bytes exhausted (tried to allocate 523800 bytes) in /var/www/html/cacti/lib/adodb/adodb.inc.php on line 833

须要导入cacti.sql文件

mysql -u root -p cacti < /var/www/html/cacti/cacti.sql

 

（五）：SNMP – Interface Statistics报错

创建SNMP – Interface Statistics报错，例如以下：

Created graph: db-m2-slave-2 - Traffic - |query_ifName|

ERROR: no Data Source associated. Check Template

[root@squid-2 html]# snmpwalk -c public -v 2c 10.254.3.73 ifHCInOctets

IF-MIB::ifHCInOctets = No more variables left in this MIB View (It is past the end of the MIB tree)

[root@squid-2 html]#

[root@squid-2 html]# snmpwalk -c public -v 2c 10.254.3.73 if

IF-MIB::ifTable = No Such Object available on this agent at this OID

于是再次改动snmpd.conf,并重新启动snmpd

access   notConfigGroup ""       any       noauth     exact   systemview none none-->

access   notConfigGroup ""       any       noauth     exact   all     none none

[root@db-m2-slave-2 ~]# service snmpd restart

停止 snmpd：                                               [确定]

正在启动 snmpd：                                           [确定]

[root@db-m2-slave-2 ~]#

[root@squid-2 html]# snmpwalk -c public -v 2c 10.254.3.73 if

IF-MIB::ifTable = No more variables left in this MIB View (It is past the end of the MIB tree)

【】解决

在snmpd.conf配置文件中面，查找下面字段：[/color]

##           incl/excl subtree                          mask

#view all    included  .1                               80

将该行前面的"#"去掉.

之后重新启动snmpd服务解决。

 

报错（六）：

移除出错的图

进去Consoleà Graph Management àHost(选择出错的主机地址)—>Search(搜索报错的keywordUsed Space)。就会找到报错不出错的Graph Title栏目，勾选右側的全选框，点击Gobutton删除掉这些无效的图就可以。例如以下图所看到的：

然后在新出来的提示界面，点击Continuebutton。删除。

 

（七）：Memory Free值为nan

分析：memery free 无数据，原因： rrdtool  的内存上限为10G。

[root@squid-2 local]# find / -name *mem*.rrd

/var/www/html/cacti/rra/db-m2-slave-1_mem_buffers_189.rrd

/var/www/html/cacti/rra/db-master-2_mem_free_156.rrd

/var/www/html/cacti/rra/db-m2-slave-1_lock_system_memory_20.rrd

/var/www/html/cacti/rra/db-m2-slave-2_total_mem_alloc_74.rrd

/var/www/html/cacti/rra/db-m2-slave-1_total_mem_alloc_23.rrd

/var/www/html/cacti/rra/db-m2-slave-2_lock_system_memory_71.rrd

/var/www/html/cacti/rra/localhost_mem_swap_4.rrd

/var/www/html/cacti/rra/db-master-2_total_mem_alloc_117.rrd

/var/www/html/cacti/rra/db-master-2_mem_cache_155.rrd

/var/www/html/cacti/rra/db-master-2_mem_buffers_154.rrd

/var/www/html/cacti/rra/db-m2-slave-1_mem_free_191.rrd

/var/www/html/cacti/rra/localhost_mem_buffers_3.rrd

/var/www/html/cacti/rra/db-m2-slave-2_mem_free_164.rrd

/var/www/html/cacti/rra/db-m2-slave-2_mem_buffers_162.rrd

/var/www/html/cacti/rra/db-m2-slave-1_mem_buffers_54.rrd

/var/www/html/cacti/rra/db-m2-slave-1_mem_swap_55.rrd

/var/www/html/cacti/rra/db-master-2_lock_system_memory_114.rrd

/var/www/html/cacti/rra/db-m2-slave-2_mem_cache_163.rrd

/var/www/html/cacti/rra/db-m2-slave-1_mem_cache_190.rrd

/var/www/html/cacti/rra/db-master-2_mem_free_146.rrd

[root@squid-2 local]#

[root@squid-2 local]# rrdtool info /var/www/html/cacti/rra/db-m2-slave-1_mem_free_191.rrd |grep mem_free

filename = "/var/www/html/cacti/rra/db-m2-slave-1_mem_free_191.rrd"

ds[mem_free].type = "GAUGE"

ds[mem_free].minimal_heartbeat = 120

ds[mem_free].min = 0.0000000000e+00

ds[mem_free].max = 1.0000000000e+07

ds[mem_free].last_ds = "34166500"

ds[mem_free].value = NaN

ds[mem_free].unknown_sec = 2

[root@squid-2 local]#

注：ds[mem_free].max = 1.0000000000e+07  数据的最大值设置为10G

查看rrdtool怎样进行改动。运行—help查看：

[root@squid-2 local]# rrdtool --help

RRDtool 1.3.8  Copyright 1997-2009 by Tobias Oetiker <tobi@oetiker.ch>

               Compiled Aug 21 2010 10:57:18

Usage: rrdtool [options] command command_options

Valid commands: create, update, updatev, graph, graphv,  dump, restore,

                   last, lastupdate, first, info, fetch, tune,

                   resize, xport

RRDtool is distributed under the Terms of the GNU General

Public License Version 2. (www.gnu.org/copyleft/gpl.html)

For more information read the RRD manpages

[root@squid-2 local]#

採用tune命令參数进行改动：

[root@squid-2 rra]# rrdtool tune *_mem_free_*.rrd mem_free:100000000

DS[mem_free] typ: GAUGE     hbt: 120   min: 0.0000      max: 10000000.0000

[root@squid-2 rra]#

有提示信息，表名tune失败，原来少了个-a參数。又一次改动例如以下：

[root@squid-2 rra]# rrdtool tune *_mem_cache_*.rrd -a mem_cache:3000000000

[root@squid-2 rra]# rrdtool tune *_mem_free_*.rrd -a mem_free:3000000000

[root@squid-2 rra]# rrdtool tune *_mem_buffers_*.rrd -a mem_buffers:3000000000

[root@squid-2 rra]#

这里发现rrdtool运行之后。仅仅有一个host主机的的nan变成数字。其它主机的都没有变， 之所以如此是由于rrdtool tune * -a …命令仅仅有一个.rrd文件起作用。其余的须要自己手动再一次次运行rrdtool tune命令。

为了简化操作。特意写了一个ssh脚本例如以下：

vim /root/rrdtool_increate_mem.shcd /var/www/html/cacti/rrals *_mem_free_*.rrd -1 >a_mem_free.txtfor i in `cat a_mem_free.txt`do	rrdtool tune $i -a mem_free:300000000;done;ls *_mem_cache_*.rrd -1 >a_mem_cache.txtfor i in `cat a_mem_cache.txt`do	rrdtool tune $i -a mem_cache:300000000;done;ls *_mem_buffers_*.rrd -1 >a_mem_buffers.txtfor i in `cat a_mem_buffers.txt`do	rrdtool tune $i -a mem_buffers:300000000;done;

直接sh /root/rrdtool_increate_mem.sh就可以。

 

【补充】

调试cacti的graph，过程例如以下：

(1)     Console ，再进入Graph Manager ,再进入，选择对于的Host，搜索Memory，选中你要的图，点击链接。比方我这里是Memory Usage，例如以下图所看到的：

 

(2)     再 点击Memory Usage链接进去，点击右上角的Debug模式：

 

(3)     就会看到例如以下的debug界面。能够慢慢来观察RRDTool Command命令，为何是-nan值。

 

 

（八）：双网卡 Traffic 网卡流量问题

例如以下图。em1和em2所有指向一个ip地址，仅仅是em1不生效。em2生效了，可是ip地址在em1上，没有显示在em2一栏。

所以，在graph图上，就没有数据。全为-nan-值，例如以下所看到的：

在cacti服务器上面运行check：

[root@squid-2 rra]# snmpwalk -v 2c -c public 10.254.3.72 IF-MIB::ifDescr

IF-MIB::ifDescr.1 = STRING: lo

IF-MIB::ifDescr.2 = STRING: em1

IF-MIB::ifDescr.3 = STRING: em2

IF-MIB::ifDescr.4 = STRING: em3

IF-MIB::ifDescr.5 = STRING: em4

[root@squid-2 rra]#

确实有4个网卡信息记录。这些都没事，正常。经过细致排查发现主要原因在下拉选框里面要选择Interface – Traffic (bits/sec)，不要选择Interface – Traffic (bytes/sec),例如以下图所看到的：

 

当选择了Interface – Traffic (bits/sec)之后graph就会出数据，有效果图了。

 

（九）：InnoDB Active/Locked Transactions

RRDTool Says:

ERROR: opening '/var/www/html/cacti/rra/db-m1-slave-1_locked_transactions_215.rrd': No such file or directory

 

原因是mysql服务器上的让cacti訪问的mysql数据库账号没有创建。创建mysql账号好，问题解决。

 

（十）：Tomcat - Connection Rate

 

RRDTool Says:

ERROR: invalid y-grid format

 依次进入Console -->Graph templates->Tomcat - Connection Rate->Unit Grid Value (--unit/--y-grid)

默认的值为1  改成为0就可以。